Specifications

Configuration Tsunami MP.11 5012/5054-SUI Installation and Management

SNMP Parameters

Click Configure > SNMP to enable or disable trap groups, and to configure the SNMP management stations to which the

5012/5054-SUI sends system traps. See “Trap Groups” in the Tsunami MP.11/QB.11 Reference Manual for a list of the

system traps.

• Trap Groups: You can enable or disable different types of traps in the system. By default, all traps are enabled.

• Trap Host Table: This table shows the SNMP management stations to which the 5012/5054-SUI sends system traps.

Trap Host Table

Add Entries to the Trap Host Table

Click the Add Table Entries button to add entries to the Trap Host Table.

Edit/Delete Entries to the Trap Host Table

Click the Edit/Delete Table Entries button to make changes to or delete existing entries.