Specifications

Installation and Initialization Tsunami MP.11 5012/5054-SUI Installation and Management
Installation Procedure
23
Step 6: Power On the Unit
The 5012/5054-SUI can be powered by a power supply (just plug the power adaptor into an AC power outlet), or by
Active Ethernet (connect an Active Ethernet DC injector to the Ethernet cable).
WARNING: For your own safety, use only the power adaptor supplied with the unit.
Step 7: View LEDs
When the unit is powered on, the 5012/5054-SUI performs startup diagnostics. When startup is completed, the LEDs
show the operational state of the 5012/5054-SUI (see the following figure).
NOTE:
• “Blinking amber/green” indicates that the LED alternates between amber and green blinks.
• “Blinking amber/yellow” indicates that the LED alternates between amber and yellow blinks.
• “Solid green or yellow” indicates that the LED displays either solid green or solid yellow, depending on the
hardware variant.
• “Blinking green or yellow” indicates that the LED blinks either green or yellow, depending on the hardware
variant.
Status Ethernet Link Wireless Link Power
Starting up N/A N/A Three red blinks followed by
temporary solid amber
Radio scanning Off: No Ethernet
Solid amber: 10 Mbps
Solid green or yellow: 100 Mbps
N/A US: Blinking amber/green or
amber/yellow
EU/WD: Blinking green or yellow
WORP link is up Off: No Ethernet
Solid amber: 10 Mbps
Solid green or yellow: 100 Mbps
Blinking green or yellow US: Solid green or yellow
EU/WD: Solid green or yellow
No WORP link Off: No Ethernet
Solid amber: 10 Mbps
Solid green or yellow: 100 Mbps
N/A US: Blinking amber/green or
amber/yellow
EU/WD: Blinking green or yellow
WORP linked, no traffic on
interface
Off: No Ethernet
Solid amber: 10 Mbps
Solid green or yellow: 100 Mbps
Blinking green or yellow US: Solid green or yellow
EU/WD: Solid green or yellow
WORP linked, normal
operation; passing traffic
Off: No Ethernet
Blinking amber: 10 Mbps
Blinking green or yellow: 100 Mbps
Blinking green or yellow US: Solid green or yellow
EU/WD: Solid green or yellow
System failure N/A N/A Solid red
Bootloader mode N/A N/A Permanent solid amber