Specifications

Installation and Initialization Tsunami MP.11 5012/5054-SUI Installation and Management

Installation Procedure

The following installation procedure provides instructions for attaching both the power and Ethernet connectors. In

situations without an external antenna (for example, during a desk tryout), the antenna cable is not required. If you are

already familiar with this type of product, you can use the Quick Install Guide for streamlined installation procedures.

NOTES:

• The Configure System window provides a selectable Country field that automatically provides the allowed

bandwidth and frequencies for the selected country/band as well as, where applicable, Dynamic Frequency

Selection (DFS) and Transmit Power Control (TPC).

• Be sure to read the Release Notes file on the product CD as it contains software version and driver information

that may not have been available when this document was produced.

See the following steps:

• Step 1: Find a Suitable Location

• Step 2: Unpack Shipping Box

• Step 3: Attach Cables

• Step 4: Install the Security Cover (Optional)

• Step 5: Mount the Unit

• Step 6: Power On the Unit

• Step 7: View LEDs

• Step 8: Connect the Pigtail Cable

• Step 9: Align the Antenna

• Step 10: Install Documentation and Software

IMPORTANT:

Before installing and using this product, see Safety and Regulatory Compliance Information on the

product CD.

IMPORTANT:

All units must be installed by a suitably trained professional installation technician or by a qualified

installation service.