Specifications

Technical Specifications Tsunami MP.11 5012/5054-SUI Installation and Management
Interfaces
152
Interfaces
Input Power Requirements
LEDs
Software Features
Category Specification
Wired Ethernet Wired Ethernet 10/100Base-TX Ethernet (RJ-45)
RS-232 Serial Connector
Antenna Connector Standard Type-N Male
Category Specification
Power Adaptor (Wall
Mount) (included)
• Input: 100 - 240 VAC, 0.4 Watts
• Output: 12 VCD, 1.5 Watts
Power-over-Ethernet • 802.3af compliant. Requires Power Injector or other 802.3af device
• Input: Voltage 42 - 60 VDC
• Output: Current 200 mA at 48 V
Power Consumption Max 10 W
Category Specification
Types • Power
• Wireless Activity
• Ethernet Activity
Category Specification
Key Features • WORP protocol
• Dynamic Data Rate Selection (Configured on BSU)
• Transmit Power Control
• Antenna Alignment
• Integrity Check for Software Upload
• Mobility with Auto-scanning
• QoS Support; up to 8 classes of service, up to 8 service flows per class (BSU only)
• Satellite Density
• Enhanced Dynamic Frequency Selection (Configured on BSU)
• Redundancy
• Spanning Tree (802.1D)
Bridging and Routing • Bridge (802.1d)
• IP/ RIPv1 (RFC 1058)
• IP/ RIPv2 (RFC 1388)
• CIDR (RFC 1519)
• ICMP (RFC 792)
• IP (RFC 791)
• ARP (RFC 826)