Specifications

Tsunami MP.11 5012/5054-SUI Installation and Management

114

Procedures

This chapter describes the following procedures:

• TFTP Server Setup: Prepares the TFTP server for transferring files to and from the 5012/5054-SUI. This procedure is

used by the other procedures that transfer files.

• Web Interface Image File Download: Upgrades the embedded software.

• Configuration Backup: Saves the configuration of the 5012/5054-SUI.

• Configuration Restore: Restores a previous configuration through configuration file download.

• Soft Reset to Factory Default: Resets the 5012/5054-SUI to the factory default settings through the Web or Command

Line Interface.

• Hard Reset to Factory Default: In some cases, it may be necessary to revert to the factory default settings (for

example, if you cannot access the 5012/5054-SUI or you lost the password for the Web Interface).

• Forced Reload: Completely resets the 5012/5054-SUI and erases the embedded software. Use this procedure only

as a last resort if the 5012/5054-SUI does not boot and the “Hard Reset to Factory Default” procedure did not help. If

you perform a “Forced Reload,” you must download a new image file as described in Image File Download with the

Bootloader.

• Image File Download with the Bootloader: If the 5012/5054-SUI does not contain embedded software, or the

embedded software is corrupt, you can use this procedure to download a new image file.