Specifications

Configuration MP.11 5054 (MP.11a) Installation and Management

Security Parameters

MAC Authentication (BSU Only)

Click Configure > Security > MAC Auth to build a list of authorized wireless stations that can register at the unit and

access the network. MAC Authentication is supported on the wireless interface and only wireless MAC addresses should

be entered in the list. For example, you might build a list of wireless MAC addresses of SUs authorized on the BSU

NOTE: MAC authentication is available only for BSUs.

Add Entries to MAC Access Control Table

1. To add table entries, click the Add Table Entries button; the following screen will be displayed:

2. Enter the MAC address and any comment, then click Add. The maximum number of MAC addresses that can be

entered is 250.

Edit/Delete Entries in MAC Access Control Table

1. To edit or delete table entries, click the Edit/Delete Table Entries button

2. Make your corrections in the window displayed and click OK.