Specifications

Configuration MP.11 5054 (MP.11a) Installation and Management

SNMP Parameters

Click Configure > SNMP to enable or disable trap groups, and to configure the SNMP management stations to which the

unit sends system traps. See “Trap Groups” in the Tsunami MP.11/QB.11 Reference Manual for a list of the system traps.

• Trap Groups: You can enable or disable different types of traps in the system. By default, all traps are enabled.

• Trap Host Table: This table shows the SNMP management stations to which the unit sends system traps.

Trap Host Table

Add Entries to the Trap Host Table

Click the Add Table Entries button to add entries to the Trap Host Table.

Edit/Delete Entries in the Trap Host Table

Click the Edit/Delete Table Entries button to make changes to or delete existing entries.