Specifications

Configuration MP.11 5054 (MP.11a) Installation and Management

Interface Parameters

Ethernet

To set the Ethernet speed, duplex mode, and input and output bandwidth limits, click Configure > Interfaces > Ethernet.

You can set the desired speed and transmission mode by clicking on Configuration. Select from these settings for the

type of Ethernet transmission:

• Half-duplex means that only one side can transmit at a time.

• Full-duplex lets both sides transmit.

• Auto-duplex selects the best transmission mode available when both sides are set to auto-select.

The recommended setting is auto-speed-auto-duplex.