Specifications

Configuration MP.11 5054 (MP.11a) Installation and Management

Network Parameters

SU Roaming Configuration

Enable or disable the Roaming feature in the Roaming Status drop-down box. The default value is disabled.

NOTE: To enable roaming, you must enable Roaming Status on both the BSU and the SU.

DHCP Server

When enabled, the DHCP server allows allocation of IP addresses to hosts on the Ethernet side of the SU or BSU.

Specifically, the DHCP Server feature lets the SU or BSU respond to DHCP requests from Ethernet hosts with the

following information:

• Host IP address

• Gateway IP address

• Subnet Mask

• DNS Primary Server IP address

• DNS Secondary Server IP

Click Configure > Network > DHCP Server to enable the unit on a DHCP Server.

The following parameters are configurable:

• DHCP Server Status: Verify that DHCP Relay Agent is disabled. After you have made at least one entry in the DHCP

server IP Pool Table, enable DHCP Server by selecting Enable from the DHCP Server Status pull-down menu.