Specifications

Basic Management MP.11 5054 (MP11.a) Installation and Management
Rebooting and Resetting
47
Soft Reset to Factory Default
If necessary, you can reset the unit to the factory default settings. This should be done only when you are experiencing
problems. Resetting to the default settings requires you to reconfigure the unit.
To reset to factory default settings:
1. Click Commands > Reset.
2. Click the Reset to Factory Default button. The device configuration parameter values are reset to their factory
default values.
If you do not have access to the unit’s user interface, you can use the procedure described in Hard Reset to Factory
Default as an alternative.