Specifications

Installation and Initialization MP.11 5054 (MP11.a) Installation and Management
Installation Procedure
22
Step 4: Remove Covers
In order to cable the unit for operation, you must first remove the front, back, and cable covers.
1. Unlock the unit’s cable cover by pressing down on the cable cover lock located on the side of the unit.
2. Pull the thin arm of the cable cover away from the unit and upward to remove the cable cover.
3. Remove the front cover from the unit (the side with the LED indicators, shown in figure A); then remove the back
cover (figure B). The unit with all covers removed is shown in figure C.
CBA