Specifications

Installation and Initialization MP.11 5054 (MP11.a) Installation and Management
Installation Procedure
21
Step 3: Attach Base (for Desktop or Ceiling Mounting only)
If the unit will be mounted on a desktop or to a ceiling, attach the metal base as follows. If the unit will be mounted to a
wall, proceed to Step 4: Remove Covers.
1. Insert the posts in the metal base into the holes on the bottom of the 5054 unit.
2. Using a Phillips-head screwdriver, tighten the screws on the bottom of the metal base to securely attach the base to
the unit.