Specifications

Technical Specifications MP.11 5054 (MP.11a) Installation and Management
Range Information
179
• Output Power Values will have a tolerance of +- 1.5 dB
Range Information
NOTE: PMP configuration using USA regulations for L and U bands, ETSI regulations for M bands. Clear LOS. Sector
antenna (17 dBi, 60-degrees) at BSU with short 1 dB jumper cable. 3’ parabolic dish (31.4 dBi) with short 1 dB
jumper cable for SUs with external antennas. Fade margin minimum of 10 dB to 2 miles, 0.2 dB additional fade
margin for every 0.1 mile to 15 dB
External Antenna
Hardware Specifications
Software Features
Frequency 6-24 Mbps @ 20 MHz
16QAM ½; QPSK ¾; QPSK ½; BPSK ¾; BPSK ½
5.25-5.35 GHz 16 dBm
5.47-5.725 GHz 16 dBm
5.725-5.850 GHz 16 dBm
Frequency 36 Mbps 6 Mbps
5.25-5.35 GHz (US) 1.1 mi/1.8 km 3.0 mi/4.8 km
5.47-5.725 GHz (ETSI) 1.0 mi/1.6 km 2.9 mi/4.7 km
5.725-5.850 GHz (US) 4.4 mi/7.1 km 12.2 mi/19.6 km
Category Specification
Radio On-board 5 GHz radio
Processor 166 MHz Motorola 8241 processor
Memory Flash: 8 MB; RAM: 16 MB
Category Specification
Key Features • WORP protocol
• Dynamic Data Rate Selection (Configured on BSU)
• Transmit Power Control
• Antenna Alignment (CLI output)
• Integrity Check for Software Upload
• Mobility with Auto-scanning
• QoS Support; up to 8 classes of service, up to 8 service flows per class (BSU only)
• Satellite Density
• Enhanced Dynamic Frequency Selection (Configured on BSU)
• Redundancy
• Spanning Tree (802.1D)