Specifications

MP.11 5054 (MP.11a) Installation and Management
14
2
Installation and Initialization
This chapter describes the steps required to install and mount the 5054, including aligning the antenna. The installation
procedure does not include the mounting and connection of antennas. See the Tsunami MP.11 Antenna Installation
Guide for this information.
If you are already familiar with this type of product, you can use the Quick Install Guide for streamlined installation
procedures.
See the following sections:
• Hardware Overview
• Product Package
• Installation Procedure
– Step 1: Choose a Location
– Step 2: Unpack Shipping Box
– Step 3: Attach Base (for Desktop or Ceiling Mounting only)
– Step 4: Remove Covers
– Step 5: Connect the Cables
– Step 6: Mount the Unit
– Step 7: Power on the Unit
– Step 8: View LEDs
– Step 9: Align the Antenna
– Step 10: Attach Kensington Security Lock (Optional)
– Step 11: Install Documentation and Software
• Initialization
– ScanTool
– Setting the IP Address with ScanTool
• Logging in to the Web Interface