Specifications

Configuration MP.11 5054 (MP.11a) Installation and Management
QoS (Quality of Service) Parameters (BSU Only)
123
• Priority: 7
• Number of Frames Per Burst: 4
• SF Entry State: Enable
2. Click Add. The UL-Management SF will be added to the QoS Service Flow Table.
NOTE: The input and output bandwidth limits set on the BSU or on the SU are used for limiting aggregate bandwidth
used by singe SU. These limits override any limit imposed by MIR in the SFC; thus, these limits should be set to
at least 1000 kbps (MIR values in UL-Management and DL-Management SFCs).
Step 3: Configure QoS Classes
Finally, the DL-Management SFC and UL-Management SFCs created in Step 2 must be added to each QoS Class used
by the TMP.11 network. Additionally, within the QoS class, these SFC must have the three PIRs mentioned in Step 1
associated with them.
A. Add SFCs to QoS Class
1. Click Configure > QoS > QoS Class.
2. Click the Details button next to the first class you wish to modify.
3. Under the SF Details heading, click Add Table Entries.
4. Configure the following parameters:
• SF Table Reference Index: DL-Management
• PIR Table Reference Index: ARP
• PIR Priority: 63
• Entry Status: Enable
5. Click Add. The DL-Management SF will be added to the Qos Class SF Index Entry list at the bottom of the page.
6. Remaining on this page, configure the parameters for the other UL-Management SF:
• SF Table Reference Index: UL-Management
• PIR Table Reference Index: ARP
• PIR Priority: 63
• Entry Status: Enable
7. Click Add. The UL-Management SF will be added to the Qos Class SF Index Entry list at the bottom of the page.
8. Return to the QoS Class screen, and repeat steps 1- 7 for any other QoS classes used in the network.
B. Add PIRs to SFCs within the QoS Class
1. Click Configure > QoS > QoS Class.
2. Click the Details button next to the first class you wish to modify.
3. Under the SF Details heading, click the Details button next to the DL-Management SF.
4. Under the PIR Index Add heading, click the Add Table Entries button.
5. Add the DST Management (whether IP or MAC) PIR to this SF by configuring the following parameters:
• PIR Table Reference Index: Management Station DST MAC Addr or Management Station DST IP Addr
• PIR Priority: 63
• Entry Status: Enable
6. Click Add. The PIR will be added to the Qos Class SF-PIR list at the bottom of the page.
7. Remaining on this page, add the SRC Management PIR to this SF by configuring the following parameters:
• PIR Table Reference Index: Management Station SRC MAC Addr or Management Station SRC IP Addr
• PIR Priority: 63