User's Manual
Table Of Contents
- _
- Chapter 6. Procedures
- Chapter 7. Troubleshooting
- _
- Appendix A. Country Codes/Channels
- Appendix B. Technical Specifications
- _
- Appendix C. Lightning Protection
- Technical Support
- Statement of Warranty
Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Appendix B. Technical Specifications 156
settings (-9dB@20MHz, -12dB@10MHz, -15dB@5MHz), should be set to meet power density rules.
Range
information for
2454-R
2
Integrated Antenna
36 Mbps
6 Mbps
2.4-2.4835GHz (US) 2.1mi/3.4km 6.9mi/11.1km
2.4-2.8 GHz (ETSI) 0.7mi/1.1km 2.6mi/4.2km
External Antenna (23dBi SU antenna)
36 Mbps
6 Mbps
2.4-2.4835GHz (US) 3.4mi/5.5km 11.4mi/18.3km
2.4-2.8 GHz (ETSI) 0.7mi/1.1km 2.6mi/4.2km
Minimum fade margin; 99.995% or better availability; average terrain/climate; no unusual multipath; proper
path clearance (0.6F1).
System
Processor and
Memory
•
166MHz Motorola 8241 processor
• 16 Mbytes RAM
• 8 Mbytes FLASH
Software
Specification
Base Station and Subscriber Units
•
Miscellaneous
• WORP protocol
• Dynamic Data Rate Selection
• Transmit Power Control
• Antenna Alignment
• Integrity Check for Software Upload
•
5, 10, and 20MHz channels
•
Satellite Density
•
Dynamic Frequency Selection
• Redundancy
• Spanning Tree (802.1D)
• Bridging and Routing
• Bridge (802.1d)
• IP/ RIPv1 (RFC 1058)
• IP/ RIPv2 (RFC 1388)
• CIDR (RFC 1519)
• ICMP (RFC 792)
• IP (RFC 791)
• ARP (RFC 826)
• Filtering
• Ethernet protocol (Ethertype)
• Static MAC
• Storm threshold
• IP address
• Broadcast protocol