User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 87
Adding Entries
Click the Add Table Entries button.
Enter the MAC address of the SU. Select Enable from the drop-down menu for the Group Index.
Click Add. The MAC address is assigned to the groups. Additions to the MAC Table take effect immediately after
clicking the Add button. You can enable, disable, delete, or reassign the groups for a MAC address by using
the Edit/Delete Table Entries button. A maximum of 250 MAC addresses can be added among all filter groups.
Block Traffic Between SUs
You can configure a Security Gateway to block traffic between SUs connected to different Base Stations. Verify
that Intra-Cell Blocking has been enabled on the Group Table tab before configuring the Security Gateway.
Security Gateway Status
Enables or disables packet forwarding to the external Security Gateway.
Security Gateway MAC Address
Lets you configure the MAC address of the external Security Gateway.