User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 84
Configure IP Access Table Filtering
The IP Access Table limits in-band management access to the IP addresses or range of IP addresses specified in
the table. This feature applies to all management services (SNMP, HTTP, and CLI) except for CLI management t
over the serial port.
To add an entry, click the Add Table Entries button, specify the IP address and mask of the wireless stations to
which you want to grant access, and click Add. To edit or delete table entries, click the Edit/Delete Table
Entries button, make your changes, and click OK.
For example, 172.17.23.0/255.255.255.0 allows access from all wireless stations with an IP address in the
172.17.23.xxx range.
Ensure that the IP address of the management PC you use is within the first entry in the table, as this filter takes
effect immediately. Otherwise, you have locked yourself out.
When you do lock yourself out, you may try to give the PC the correct IP address; otherwise you must reset the
unit.