User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 102
Entry Status
This field is always set to Enable.
Click Add to add the entry. The new entry will show up on the screen taking up the next sequential index entry.
You may delete any PIR entry by clicking on the Status drop-down box.
Back to the QoS Class screen
on page 100, to add a new SFC and associate it to this QoS Class click the Add
Table Entries button.
Field Descriptions
SF Table Reference Index
Select one of the possible SFCs that have been previously configured from the drop-down box to associate to
this QoS Class.
PIR Table Reference Index
Select one of the possible PIRs that have been previously configured from the drop-down box to associate to
this SFC.
PIR Priority
This priority per rule defines the order of execution of PIRs during packet identification process. The PIR
priority is a number in the range 0-63, with priority 63 being executed first, and priority 0 being executed last.
The PIR priority is defined within a QoS class, and can be different for the same PIR in some other QoS
class. If all PIRs within one QoS class have the same priority, the order of execution of PIR rules will be
defined by the order of definition of SFCs, and by the order of definition of PIRs in each SFC, within that QoS
class.
Entry Status
This field is always set to Enable.
Click Add to add the entry. The new entry will show up on the screen taking up the next sequential index entry.
From this screen you may also edit an existing SFC by clicking on its Details button. This will take you to the
same QoS Class SF Class Entry Details screen
on page 101.