User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 99
MIR (Maximum Information Rate)
The maximum sustained data rate specified in units of 1 Kbps from 8 Kbps up to the maximum rate of 108000
Kbps per SU.
CIR (Committed Information Rate)
The minimum reserved traffic rate specified in units of 1 Kbps from 0 Kbps up to the maximum rate of 10000
Kbps per SU.
Latency
The maximum allowed latency specified in increments of 5 ms steps from a minimum of 5 ms up to a
maximum of 100 ms.
Jitter
The maximum tolerable jitter specified in increments of 5 ms steps from a minimum of 0 ms up to the
Maximum Latency (in ms).
Priority
The priority of this SFC from zero (0) to seven (7), 0 being the lowest, 7 being the highest.
Number of Frames per Burst
The Maximum number of data messages in a Multi-Frame burst from one (1) to four (4), which affects the
percentage of the maximum throughput of the system according to the table
on page 62.
SF Entry State
This field can be set to Enable, Disable, or Delete.
Click Add to add the entry. The new entry will show up on the screen taking up the next sequential index entry.
To make changes to the entries of the SFC Table, click the Edit/Delete Table Entries button.
Enter your changes and click OK. To delete an entry, click the Status drop-down box and select Delete, then
click OK.