User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 94
º When the BSU is changed to Trunk mode from Transparent mode, all the configured SUs are changed
to Trunk mode by default.
Access VLAN ID
The Access VLAN ID applies when the SU is in Access mode.
The Access VLAN ID values range from 1 to 4095; the default value is 1.
Access VLAN Priority
The Access VLAN Priority applies when the SU is in Access Mode. The Access VLAN priority values range
from 0 to 7; the default priority is 0. For voice frames, the priority field is set to the VoIP configured value (5
according to latest IETF draft, or 6 according to IEEE 802.1D) regardless of the priority value configured.
Management VLAN ID
The management VLAN ID applies when the SU is in Trunk mode or Access mode. The management
VLAN ID values range from 1 to 4095; the default value is 1.
Management VLAN Priority
The Management VLAN Priority applies when the SU is in Trunk mode or Access mode. The management
VLAN priority values range from 0 to 7; the default priority is 0.
Adding SU Table Entries
To add entries to the SU Table, click the Add Table Entries button. Enter the VLAN ID and select a Status, then
click Add to add and save the entry.
Editing SU Table Entries
To edit SU table entries, click the Edit/Delete Table Entries button; make your changes on the window
displayed, then click OK to save your changes. (You may need to scroll to the right to see the Edit/Delete Table
Entries button.)