User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 73
7) Configure Security Parameters
Configure MAC Authentication
Click the Configure button, the Security tab, and the MAC Auth sub-tab to build a list of authorized wireless
stations that can register at the unit and access the network.
MAC authentication is available only for Base Station units.
This feature is supported on the wireless interface and only wireless MAC addresses should be entered in the list.
For example, build a list of wireless MAC addresses on the BSU for the authorized SUs.
To add table entries, click the Add Table Entries button; a window such as the following is displayed:
Enter the MAC address and any comment, then click Add. The maximum number of MAC addresses that can be
entered is 250.
To edit or delete table entries, click the Edit/Delete Table Entries button; make your corrections in the window
displayed and click OK.