User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 71
HTTP (Web) Password
The password for the Web browser HTTP interface. Enter a password in both the Password field and the
Confirm field. The default password is public.
Configure Service Parameters
The Services tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) parameters. Changes to these
parameters require a reboot to take effect.
SNMP Configuration Settings
SNMP Interface Bitmask:
Configure the interface or interfaces (Ethernet, Wireless, All Interfaces) from which you will manage the unit
using SNMP. You also can select Disabled to prevent a user from accessing the unit through SNMP.
HTTP Configuration Settings
HTTP Interface Bitmask
Configure the interface or interfaces (Ethernet, Wireless, All Interfaces) from which you will manage the unit
through the Web interface. For example, to allow Web configuration through the Ethernet network only, set
HTTP Interface Bitmask to Ethernet. You can also select Disabled to prevent a user from accessing the unit
from the Web interface.
HTTP Port
Configure the HTTP port from which you will manage the unit through the Web interface. By default, the
HTTP port is 80.