User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 70
RIP Notes
• Ensure that routers on the same physical network are configured to use the same version of RIP.
• Routing updates occur every 30 seconds. It may take up to 3 minutes for a route that has gone down to
timeout in a routing table.
• RIP is limited to networks with 15 or fewer hops.
6) Configure Management Parameters
When you click the Management button, the Passwords tab is displayed automatically. The other tab under
Management is the Services tab.
Configure Passwords
The Password tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) passwords.
Field Descriptions
For all password fields, the passwords must be between 6 and 32 characters.. Changes take effect immediately
after you click OK.
SNMP Read Community Password
The password for read access to the unit using SNMP. Enter a password in both the Password field and the
Confirm field. The default password is public.
SNMP Read/Write Community Password
The password for read and write access to the unit using SNMP. Enter a password in both the Password
field and the Confirm field. The default password is public.
Telnet (CLI) Password
The password for the CLI interface (via serial or Telnet). Enter a password in both the Password field and the
Confirm field. The default password is public.