User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 69
RIP Example
In the following example, assume that both the BSU and the SUs all are configured in Routing mode with RIP
enabled to send and receive on both the Ethernet and Wireless interfaces. The network converges through
updates until each unit has the following routing table:
BSU
0.0.0.0 172.16.0.1 metric 1
172.16.0.0 172.16.0.20 metric 1
10.0.0.0 10.0.0.1 metric 1
100.0.0.0 10.0.0.2 metric 2
200.0.0.0 10.0.0.3 metric 2
SU1
0.0.0.0 10.0.0.1 metric 1
10.0.0.0 10.0.0.2 metric 1
100.0.0.0 100.0.0.1 metric 1
172.16.0.0 10.0.0.1 metric 2
200.0.0.0 10.0.0.2 metric 2
SU2
0.0.0.0 10.0.0.1 metric 1
10.0.0.0 10.0.0.3 metric 1
200.0.0.0 200.0.0.1 metric 1
172.16.0.0 10.0.0.1 metric 2
100.0.0.0 10.0.0.2 metric 2