User's Manual

Tsunami MP.11 2454-R, 5054-R, and 5054-R-LR Installation and Management
Chapter 5. Using the Web Interface 63
Satellite Mode – US Country
Field Descriptions
All the fields that are common to both the BSU and the SU are applicable here. The SU features two additional
fields:
Base Station System Name (SU only)
The name found on the system page of the BSU to which this SU is connecting. This parameter can be used
as an added security measure, and when there are multiple BSUs in the network and you want an SU to
register with only one when it may actually have adequate signal strength for either. The System Name field
is limited to a length of 32 bytes.
If the Base Station System Name is left blank on the SU, it can register with any Base Station with a
matching Network Name and Network Secret.
Scanning Across Bandwidth (SU only)
Enable this field if you want the SU to scan across the whole range of channel bandwidths (5, 10, or 20 MHz)
with or without roaming enabled. Disable this field if you wish the SU to scan only across its configured
channel bandwidth.