Application Guide

MSNTN01: Controlling the MSNSwitch
Page 2
1. Internal Web Sever
Full access to all of the MSNSwitch’s functionality is available via its internal web server pages. To access the
web server, enter the MSNSwitch’s IP address into any web browser.
http://<ip-address-of-MSNSwitch>
e.g. http://192.168.1.33
The default username for the MSNSwitch is “admin”.
The default password for firmware versions prior to MNT.9731 is “admin”.
For MNT.9731 and later, the default password is the last 6 characters of the MSNSwitch’s MAC address (upper
case). See the MSNSwitch bottom label for the MAC address.
If you do not know the IP address of your MSNSwitch, check your DHCP server log or use the Netility utility
software to scan for the MSNSwitch (see page 15).
NOTE: If you do not have a DHCP server on your LAN, power on the MSNSwitch and wait for Outlet#1 and #2 to
turn on. Then press the UIS button for 10 seconds, then release. The MSNSwitch will attempt to assign
itself to a free address between .100 - .110 in the subnet of your LAN (e.g. 192.168.1.100).