User`s guide

II. Hardware Indicators & Connections
Figure 2: LAN-Cell 2 Front Panel
LABEL LED STATE DESCRIPTION
PWR Flashing Green Power-on Self Test is in progress.
(approximately 60 sec)
Solid Green Powered on and running.
Solid Red Supplied voltage is too low.
LAN /
DMZ 1-4
Solid Green (10 Mbps)
Solid Orange (100 Mbps)
Link Status on the corresponding
wired LAN/DMZ Ethernet ports.
Flashing Green (10 Mbps)
Flashing Orange (100 Mbps)
Data activity on the corresponding
LAN/DMZ Ethernet ports.
WAN Solid Green (10 Mbps)
Solid Orange (100 Mbps)
Link Status on the wired WAN
Ethernet port.
Flashing Green (10 Mbps)
Flashing Orange (100 Mbps)
Data activity on the wired WAN
Ethernet port.
AUX Solid Green Dial-Backup port is Enabled &
connected to a remote server.
Flashing Green Data activity on the Dial-Backup port.
WLAN Solid Green The LAN-Cell’s internal WLAN
Access Point is Enabled.
Flashing Green Data activity between the LAN-Cell
and a WLAN client device.
CELL Flashing Green 3G Cellular Card is initializing OR not
registered on the carrier network OR
there is no compatible cellular service
available at the current location.
Solid Green 3G Cellular Card is ready to make a
connection.
Solid Orange 3G Cellular Card has made a
connection to the carrier’s network.
Flashing Orange Data activity between the LAN-Cell
and the 3G Cellular carrier’s network.
Flashing Green/Orange Signal strength or quality is Poor.
Connections may be unreliable.
2