User`s guide

Chapter 4 LAN Screens
LAN-Cell 2 User’s Guide
81
Figure 41 NETWORK > LAN
The following table describes the labels in this screen.
Table 15 NETWORK > LAN
LABEL DESCRIPTION
LAN TCP/IP
IP Address Type the IP address of your LAN-Cell in dotted decimal notation. 192.168.1.1 is the
factory default. Alternatively, click the right mouse button to copy and/or paste the
IP address.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
LAN-Cell automatically calculates the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the LAN-Cell.
RIP Direction RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls
the sending and receiving of RIP packets. Select the RIP direction from Both/In
Only/Out Only/None. When set to Both or Out Only, the LAN-Cell will broadcast
its routing table periodically. When set to Both or In Only, it will incorporate the
RIP information that it receives; when set to None, it will not send any RIP packets
and will ignore any RIP packets received. Both is the default.