User`s guide

Chapter 3 Tutorials: 3G Modem Setup & VPN Wizard
LAN-Cell 2 User’s Guide
71
3.3.3.1 Firewall Rule to Allow Access Example
Configure a firewall rule that allows FTP access from the VPN tunnel to the FTP server.
1 Click Security > Firewall > Rule Summary.
2 Select VPN to LAN as the packet direction and click Refresh.
Figure 36 SECURITY > FIREWALL > Rule Summary
3 Insert a new by clicking the plus sign (+) under the Modify column. Define the rule as
shown in the following figure and click Apply. The source addresses are the VPN rule’s
remote network and the destination address is the LAN FTP server.