User`s guide
Chapter 44 Product Specifications
LAN-Cell 2 User’s Guide
579
Cable Pin Assignments
In a serial communications connection, generally a computer is DTE (Data Terminal
Equipment) and a modem is DCE (Data Circuit-terminating Equipment). The LAN-Cell is
DCE when you connect a computer to the console port. The LAN-Cell is DTE when you
connect a modem to the dial backup port.
6
The console cable and dial backup cable each have an RJ-45 connector and a DB-9 connector.
The pin layout for the DB-9 connector end of the cables is as follows.
Figure 383 Console/Dial Backup Cable DB-9 End Pin Layout
JAPAN PLUG STANDARDS
AC POWER ADAPTOR MODEL PSA18R-120P (ZA)-R
INPUT POWER 100-240VAC, 50/60HZ, 0.5A
OUTPUT POWER 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS JET
CHINA PLUG STANDARDS
AC POWER ADAPTOR MODEL PSA18R-120P (ZA)-R
INPUT POWER 100-240VAC, 50/60HZ, 0.5A
OUTPUT POWER 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS CCC
6. Pins 2,3 and 5 are used.
Table 235 Console Cable Pin Assignments
PIN DEFINITION RJ-45 END
DB-9M (MALE)
END
DSR 1 6
DTR 2 4
TX 3 3
RTS 4 7
GND 5 5
RX 6 2