User`s guide

LAN-Cell 2 User’s Guide
575
CHAPTER 44
Product Specifications
The following tables summarize the LAN-Cell’s hardware and firmware features.
Table 231 Hardware Specifications
Dimensions 220 (W) x 137 (D) x 32 (H) mm
Weight 1.09 kg
Power Specification 12V DC. 2.1 mm jack (center pin positive)
Power Consumption 5W Typical; 8W Max
Ethernet Interface
LAN/DMZ Four LAN/DMZ/WLAN auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-
45 Ethernet ports.
WAN One auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45 Ethernet port
Reset Button Restores factory default settings
Console RJ-45 port for RS-232 null modem connection
Dial Backup RJ-45 port for RS-232 connection
PC-Card Slot For installing a 3G card. Optional Card-Guard 3G card protection cover
includes mounting hole for bulkhead SMA antenna jacks. 3G Card pig-tail
connectors are available separately..
WLAN Antenna One 2 dBi rubber duck style swivel 802.11 a/b/g antenna (SMA-RP
Female). WLAN jack on the LAN-Cell is SMA-RP Male
Card-Lock Use 18lb tensile strength (miniature) cable-ties. Max. width 0.1 in (2.5 mm)
Operation Temperature -30º C ~ 60º C
Operation Humidity 20% ~ 92% RH (non-condensing)
Certifications EMC: FCC Part 15 Class B, CE-EMC Class B, C-Tick Class B, VCCI Class
B
Safety: CSA International, CE EN60950-1 (UL60950-1, CSA60950-1,
EN60950-1, IEC60950-1)
Table 232 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Default DHCP Pool 192.168.1.33 to 192.168.1.160
Device Management Use the web configurator to easily configure the rich range of features on
the LAN-Cell.