User`s guide

Chapter 39 System Maint. Menus 8 to 10
LAN-Cell 2 User’s Guide
544
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means “or”.
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
39.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.
Figure 366 Valid Commands
The following table describes some commands in this screen.
Copyright (c) 1994 - 2007 Proxicast LLC
LAN-Cell> ?
Valid commands are:
sys ls exit device
ether aux config wwan
wlan ip ipsec bm
certificates 8021x radius radserv
wcfg
LAN-Cell>
Table 221 Valid Commands
COMMAND DESCRIPTION
sys The system commands display device information and configure device settings.
ls The load sharing commands allow you to configure load balancing.
exit This command returns you to the SMT main menu.
device The device commands deal with the dial backup connection.
ether These commands display Ethernet information and configure Ethernet settings.
aux These commands display dial backup information and control dial backup connections.
config These commands configure firewall and anti-spam settings.
wwan These commands configure the 3G cellular WAN interface
wlan These commands configure the internal 801.11 Wi-Fi- Access Point
ip These commands display IP information and configure IP settings.
ipsec These commands display IPSec information and configure IPSec settings.
bm These commands configure bandwidth management settings and display bandwidth
management information.
certificates These commands display certificate information and configure certificate settings.
8021x These commands configure 802.1x settings and display 802.1x information.