User`s guide

Chapter 37 System Information & Diagnosis
LAN-Cell 2 User’s Guide
528
Table 217 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host Enter 1 to ping any machine (with an IP address) on your LAN, DMZ, WLAN
or WAN. Enter its IP address in the Host IP Address field below.
WAN DHCP Release Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal Enter 3 to renew your WAN DHCP settings.
PPPoE/PPTP/Cellular
Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - WAN ISP Setup. Please refer to Chapter 27 on page 447 for more
details.
This feature is only available for a 3G connection or dial-up connections
using PPPoE or PPTP encapsulation.
Reboot System Enter 11 to reboot the LAN-Cell.
WAN If you entered 2, 3 or 4 in the Enter Menu Selection Number field, enter the
number of the WAN interface in this field. 1=Ethernet WAN, 2=Cellular WAN
Host IP Address If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.