User`s guide

Chapter 37 System Information & Diagnosis
LAN-Cell 2 User’s Guide
527
Figure 344 Menu 24.4: System Maintenance: Diagnostic
37.5.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 345 on page 527.
LAN DHCP has already been discussed. The LAN-Cell can act either as a WAN DHCP client
(IP Address Assignment field in menu 4 or menu 11.x.2 is Dynamic and the Encapsulation
field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN
Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the
assigned WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.
Figure 345 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your LAN-Cell
and associated connections.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE/PPTP/Cellular Setup Test
System
11. Reboot System
Enter Menu Selection Number:
WAN=
Host IP Address= N/A