User`s guide

Chapter 2 Introducing the Web Configurator & Home Screen
LAN-Cell 2 User’s Guide
50
Figure 21 Home > Bandwidth Monitor
The following table describes the labels in this screen.
2.3.10 Status Bar
The Status Bar area displays system confirmation and error messages as you navigate through
the Web Configurator. Whenever clicking “Apply” to save configuration parameters, be sure
to wait for the Status Bar message “Configuration updated successfully” before moving to
the next screen.
Table 9 ADVANCED > BW MGMT > Monitor
LABEL DESCRIPTION
Interface Select an interface from the drop-down list box to view the bandwidth usage
of its bandwidth classes.
Class This field displays the name of the bandwidth class.
A Default Class automatically displays for all the bandwidth in the Root
Class that is not allocated to bandwidth classes. If you do not enable
maximize bandwidth usage on an interface, the LAN-Cell uses the bandwidth
in this default class to send traffic that does not match any of the bandwidth
classes.
A
A. If you allocate all the root class’s bandwidth to the bandwidth classes, the default class still displays a budget of 2
kbps (the minimum amount of bandwidth that can be assigned to a bandwidth class).
Budget (kbps) This field displays the amount of bandwidth allocated to the bandwidth class.
Current Usage (kbps) This field displays the amount of bandwidth that each bandwidth class is
using.
Automatic Refresh
Interval
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not
update the screen statistics.
Refresh Click this button to update the screen’s statistics immediately.