User`s guide

Chapter 29 Route Setup
LAN-Cell 2 User’s Guide
458
The following table describes the fields in this menu.
29.3 Traffic Redirect
To configure the parameters for traffic redirect, enter 2 in Menu 6 - Route Setup to open
Menu 6.2 - Traffic Redirect as shown next.
Figure 279 Menu 6.2: Traffic Redirect
The following table describes the fields in this menu.
Table 194 Menu 6.1: Route Assessment
FIELD DESCRIPTION
Probing WAN/CELL
Check Point
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your LAN-
Cell's WAN accessibility.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the LAN-Cell will use
the default gateway IP address.
Probing Traffic
Redirection Check
Point
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your LAN-
Cell's traffic redirect connection.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the LAN-Cell will use
the default gateway IP address.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.
Menu 6.2 - Traffic Redirect
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 14
Press ENTER to Confirm or ESC to Cancel:
Table 195 Menu 6.2: Traffic Redirect
FIELD DESCRIPTION
Active Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic
redirect setup. The default is No.
Backup Gateway IP
Address
Enter the IP address of your backup gateway in dotted decimal notation.
The LAN-Cell automatically forwards traffic to this IP address if the LAN-Cell's
Internet connection terminates.
Metric This field sets this route's priority among the routes the LAN-Cell uses.
Enter a number from 1 to 15 to set this route's priority among the LAN-Cell's
routes (see Section on page 92) The smaller the number, the higher priority
the route has.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.