User`s guide

Chapter 28 DMZ Setup
LAN-Cell 2 User’s Guide
454
28.3 TCP/IP Setup
For more detailed information about RIP setup, IP Multicast and IP alias, please refer to
Chapter 4 on page 77.
28.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 274 Menu 5: DMZ Setup
From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays
Menu 5.2 - TCP/IP and DHCP Ethernet Setup, as shown next.
Figure 275 Menu 5.2: TCP/IP and DHCP Ethernet Setup
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to Section
26.4 on page 442 for information on how to configure these fields.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 10.10.2.1
Size of Client IP Pool= N/A IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel: