User`s guide

Chapter 27 Ethernet WAN Internet Access
LAN-Cell 2 User’s Guide
450
Figure 270 IEthernet WAN Setup (PPTP)
The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.
27.4 Configuring the PPPoE Client
If you enable PPPoE in menu 4, you will see the next screen.
Menu 4 - Ethernet WAN Setup
ISP's Name= WAN
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Table 192 New Fields in Menu 4 (PPTP) Screen
FIELD DESCRIPTION
Encapsulation Press [SPACE BAR] and then press [ENTER] to choose PPTP. The encapsulation
method influences your choices for the IP Address field.
Idle Timeout This value specifies the time, in seconds, that elapses before the LAN-Cell
automatically disconnects from the PPTP server.