User`s guide

Chapter 25 WAN, 3G and Dial Backup Setup
LAN-Cell 2 User’s Guide
439
Edit Script
Options
Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT script for the
dial backup remote node (Menu 11.3.3 - Remote Node Script). See Section 25.3.5
on page 434 for more information.
Always On Press [SPACE BAR] to select Yes to set this connection to be on all the time,
regardless of whether or not there is any traffic. Select No to have this connection act
as a dial-up connection.
Session
Options
Edit Filter sets This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and press
[ENTER] to open menu 11.3.4 to edit the filter sets. See Section 25.3.6 on page 436
for more details.
Idle Timeout Enter the number of seconds of idle time (when there is no traffic from the LAN-Cell
to the remote node) that can elapse before the LAN-Cell automatically disconnects
the 3G connection. .
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.
Table 187 Menu 11.2: Remote Node Profile (3G WAN) (continued)
FIELD DESCRIPTION