User`s guide
Chapter 24 General Setup
LAN-Cell 2 User’s Guide
424
Figure 254 Menu 1.1.1: DDNS Edit Host
The following table describes the fields in this screen.
Menu 1.1.1 - DDNS Edit Host
Hostname= LC2.proxicast.com
DDNS Type= DynamicDNS
Enable Wildcard Option= Yes
Enable Off Line Option= N/A
Bind WAN= 1
HA= Yes
IP Address Update Policy:
Let DDNS Server Auto Detect= Yes
Use User-Defined= N/A
Use WAN IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 178 Menu 1.1.1: DDNS Edit Host
FIELD DESCRIPTION
Host Name Enter your host name in this field.
DDNS Type Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have the
Dynamic DNS service.
Select StaticDNS if you have the Static DNS service.
Select CustomDNS if you have the Custom DNS service.
Enable
Wildcard
Option
Your LAN-Cell supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER]
to select Yes or No. This field is N/A when you choose DDNS client as your service
provider.
Enable Off
Line Option
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
http://
www.dyndns.org/ traffic is redirected to a URL that you have previously specified
(see www.dyndns.org
for details).
Bind WAN Enter the WAN interface to use for updating the IP address of the domain name.
HA Press [SPACE BAR] and then [ENTER] to select Yes to enable the high availability
(HA) feature.
If the WAN interface specified in the Bind WAN field does not have a connection, the
LAN-Cell will attempt to use the IP address of another WAN interface to update the
domain name.
When the WAN interfaces are in the active/passive operating mode, the LAN-Cell will
update the domain name with the IP address of whichever WAN interface has a
connection, regardless of the setting in the Bind WAN field.
Clear this check box and the LAN-Cell will not update the domain name with an IP
address if the WAN interface specified in the Bind WAN field does not have a
connection.
Note: If you enable high availability, DDNS can also function when the
LAN-Cell uses the dial backup port. DDNS does not function
when the LAN-Cell uses traffic redirect.
Refer to Section on page 317 for detailed information.