User`s guide

Chapter 23 Introducing the SMT
LAN-Cell 2 User’s Guide
417
23.3.2 SMT Menus Overview
The following table gives you an overview of your LAN-Cell’s various SMT menus.
Table 174 SMT Menus Overview
MENUS SUB MENUS
1 General Setup 1.1 Configure Dynamic DNS 1.1.1 DDNS Host Summary 1.1.1 DDNS Edit Host
2 WAN Setup 2.1 Advanced WAN Setup
3 LAN Setup 3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP
Ethernet Setup
3.2.1 IP Alias Setup
4 Ethernet WAN Setup
5 DMZ Setup 5.1 DMZ Port Filter Setup
5.2 TCP/IP and DHCP
Ethernet Setup
5.2.1 IP Alias Setup
6 Route Setup 6.1 Route Assessment
6.2 Traffic Redirect
6.3 Route Failover
7 WLAN Setup 7.2 TCP/IP and DHCP
Ethernet Setup
7.2.1 IP Alias Setup
11 WAN ISP Setup 11.1 Remote Node Profile
(WAN)
11.1.2 Remote Node Network
Layer Options
11.1.4 Remote Node Filter
11.1.5 Traffic Redirect Setup
(for the LAN-Cell 5 only)
11.2 Remote Node Profile
(Cellular 3G WAN)
11.2.2 Remote Node Network
Layer Options
11.2.3 Remote Node Script
11.2.4 Remote Node Filter
11.3 Remote Node Profile (Dial
Backup ISP)
11.3.1 Remote Node PPP
Options
11.3.2 Remote Node Network
Layer Options
11.3.3 Remote Node Script
11.3.4 Remote Node Filter
12 Static Routing Setup 12.1 Edit Static Route Setup
15 NAT Setup 15.1 Address Mapping Sets 15.1.x Address Mapping
Rules
15.1.x.x Address
Mapping Rule
15.2 NAT Server Sets 15.2.x NAT Server Setup 15.2.x.x - NAT Server
Configuration
15.3 Trigger Ports 15.3.x Trigger Port Setup