User`s guide

Chapter 22 Maintenance Screens
LAN-Cell 2 User’s Guide
410
SMTP
Authentication
SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for
the Internet. SMTP enables you to move messages from one e-mail server to
another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not receive the e-
mail diagnostic files.
User Name Enter the user name (up to 63 characters) (usually the user name of a mail
account).
Password Enter the password associated with the user name above.
Perform
Diagnostics Now
Click this button to generate and send a diagnostic file immediately, instead of
based on a time period or CPU usage level.
Schedule Diagnostics
Periodic
Diagnostics
Use these fields to set the LAN-Cell to generate and send diagnostic files at
regular intervals.
Even if you enable both CPU utilization-based and periodic diagnosis, the LAN-
Cell only sends one diagnostic file within five minutes (unless you click Perform
Diagnostics Now).
Diagnostics
Frequency
Set how often the LAN-Cell generates and sends diagnostic files.
Hourly
Daily
Weekly
None.
If you select Daily or Weekly, specify a time of day for the LAN-Cell to generate
and send diagnostic files. If you select Weekly, then also specify which day of
the week. Select None to have the LAN-Cell not generate and send diagnostic
files based on a time period.
Day for Diagnostics Use the drop down list box to select which day of the week to generate and send
diagnostic files.
Time for
Diagnostics
Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm) to
generate and send diagnostic files.
Apply Click Apply to save your changes back to the LAN-Cell.
Reset Click Reset to begin configuring this screen afresh.
Table 171 MAINTENANCE > Diagnostics (continued)
LABEL DESCRIPTION