User`s guide

Chapter 22 Maintenance Screens
LAN-Cell 2 User’s Guide
400
When the LAN-Cell uses the NTP time server pools, it randomly selects one pool and tries to
synchronize with a server in it. If the synchronization fails, then the LAN-Cell goes through
the rest of the list in order from the first one tried until either it is successful or all the pre-
defined NTP time server pools have been tried.
Resetting the Time
The LAN-Cell resets the time in the following instances:
• When you click
Synchronize Now.
• On saving your changes.
• When the LAN-Cell starts up.
• 24-hour intervals after starting.
To change your LAN-Cell’s time and date, click MAINTENANCE > Time and Date. The
screen appears as shown. Use this screen to configure the LAN-Cell’s time based on your local
time zone.
Figure 232 MAINTENANCE > Time and Date
The following table describes the labels in this screen.
Table 168 MAINTENANCE > Time and Date
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the LAN-Cell’s present time.