User`s guide

Chapter 2 Introducing the Web Configurator & Home Screen
LAN-Cell 2 User’s Guide
40
2.3.3 Main Window
The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
REMOTE
MGMT
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTPS or HTTP to manage
the LAN-Cell.
SSH Use this screen to configure through which interface(s) and from
which IP address(es) users can use Secure Shell to manage the
LAN-Cell.
TELNET Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the LAN-
Cell.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the LAN-Cell.
SNMP Use this screen to configure your LAN-Cell’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the LAN-
Cell.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.
POLICY ROUTE Policy Route
Summary
Use this screen to view a summary list of all the policies and
configure policies for use in IP policy routing.
BW MGMT Summary Use this screen to enable bandwidth management on an interface.
Class Setup Use this screen to set up the bandwidth classes.
Monitor Use this screen to view the LAN-Cell’s bandwidth usage and
allotments.
Custom APP Custom App Use this screen to specify port numbers for the LAN-Cell to
monitor for FTP, HTTP, SMTP, POP3, H323, and SIP traffic.
ALG ALG Use this screen to allow certain applications to pass through the
LAN-Cell.
LOGS View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your LAN-Cell’s log settings.
MAINTENANCE General This screen contains administrative.
Password Use this screen to change your password.
Time and Date Use this screen to change your LAN-Cell’s time and date.
F/W Upload Use this screen to upload firmware to your LAN-Cell
Backup &
Restore
Use this screen to backup and restore the configuration or reset
the factory defaults to your LAN-Cell.
Restart This screen allows you to reboot the LAN-Cell without turning the
power off.
Diagnostics Use this screen to have the LAN-Cell generate and send
diagnostic files by e-mail and/or the console port.
LOGOUT Click this label to exit the web configurator.
Table 3 Screens Summary (continued)
LINK TAB FUNCTION