User`s guide

Chapter 2 Introducing the Web Configurator & Home Screen
LAN-Cell 2 User’s Guide
38
2.3.2 Navigation Panel
The following table describes the sub-menus on the left side navigation panel.
Table 3 Screens Summary
LINK TAB FUNCTION
HOME This screen shows the LAN-Cell’s general device and network
status information. Use this screen to access the wizards,
statistics and DHCP table.
NETWORK
LAN LAN Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
IP Alias Use this screen to partition your LAN interface into subnets.
Port Roles Use this screen to change the LAN/DMZ/WLAN port roles.
WAN General This screen allows you to configure load balancing, route priority
and traffic redirect properties.
WAN Use this screen to configure the WAN connection for Internet
access.
Cellular Use this screen to configure the Cellular connection for Internet
access.
Traffic
Redirect
Use this screen to configure your traffic redirect properties and
parameters.
Dial Backup Use this screen to configure the backup WAN dial-up connection.
DMZ DMZ Use this screen to configure your DMZ connection.
Static DHCP Use this screen to assign fixed IP addresses on the DMZ.
IP Alias Use this screen to partition your DMZ interface into subnets.
Port Roles Use this screen to change the LAN/DMZ/WLAN port roles on the
LAN-Cell.
WLAN WLAN Use this screen to configure your WLAN connection.
Static DHCP Use this screen to assign fixed IP addresses on the WLAN.
IP Alias Use this screen to partition your WLAN interface into subnets.
Port Roles Use this screen to change the LAN/DMZ/WLAN port roles on the
LAN-Cell.
WIRELESS
CELLULAR Use this screen to configure the Cellular connection for Internet
access.
Wi-Fi Wi-Fi
Configuration
Use this screen to configure the internal Wi-Fi Access Point
settings.
Security Use this screen to configure the WLAN security settings.
MAC Filter Use this screen to change MAC filter settings on the LAN-Cell
SECURITY