User`s guide

LAN-Cell 2 User’s Guide
35
CHAPTER 2
Introducing the Web
Configurator & Home Screen
This chapter describes how to access the LAN-Cell web configurator and provides an
overview of its screens.
2.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy LAN-Cell
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Appendix A on page 583 if you want to make sure these functions are allowed in Internet
Explorer or Netscape Navigator.
2.2 Accessing the LAN-Cell Web Configurator
" By default, the packets from WLAN to WLAN/LAN-Cell are dropped and users
cannot configure the LAN-Cell wirelessly. We do not recommend configuring
the LAN-Cell via a WLAN connection.
1 Make sure your LAN-Cell hardware is properly connected and prepare your computer/
computer network to connect to the LAN-Cell (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "192.168.1.1" as the URL. The LAN-Cell Login screen will appear Figure 12)