User`s guide

Chapter 17 Policy Route Screens
LAN-Cell 2 User’s Guide
346
Figure 215 Edit IP Policy Route
The following table describes the labels in this screen.
Table 130 ADVANCED > POLICY ROUTE > Edit
LABEL DESCRIPTION
Criteria
Active Select the check box to activate the policy.
Rule Index This is the index number of the policy route.
IP Protocol Select Predefined and then the IP protocol from ALL(0), ICMP(1), IGMP(2),
TCP(6), UDP(17), GRE(47), ESP(50) or AH(51).
Otherwise, select Custom and enter a number from 0 to 255.
Type of Service Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max
Thruput, Max Reliable or Mix Cost.
Precedence Precedence value of the incoming packet. Select a value from 0 to 7 or Any.
Packet Length Type a length of packet (in bytes). The operators in the Len Compare field apply
to incoming packets of this length.