User`s guide

Chapter 15 Remote Management Screens
LAN-Cell 2 User’s Guide
337
The following table describes the labels in this screen.
15.12 Remote Management Technical Reference
How SSH Works
The following table summarizes how a secure connection is established between two remote
hosts.
Figure 210 How SSH Works
1 Host Identification
The SSH client sends a connection request to the SSH server. The server identifies itself
with a host key. The client encrypts a randomly generated session key with the host key
and server key and sends the result back to the server.
Table 126 ADVANCED > REMOTE MGMT > DNS
LABEL DESCRIPTION
Server Port The DNS service port number is 53 and cannot be changed here.
Service Access Select the interface(s) through which a computer may send DNS queries to the
LAN-Cell.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to send DNS queries to the
LAN-Cell.
Select All to allow any computer to send DNS queries to the LAN-Cell.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the LAN-Cell.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.