User`s guide

Chapter 15 Remote Management Screens
LAN-Cell 2 User’s Guide
326
3 Use the “put” command to upload a new firmware to the LAN-Cell.
Figure 200 Secure FTP: Firmware Upload Example
15.3 WWW
Click ADVANCED > REMOTE MGMT to open the WWW screen. Use this screen to
configure the LAN-Cell’s HTTP and HTTPS management settings.
Figure 201 ADVANCED > REMOTE MGMT > WWW
$ sftp -1 192.168.1.1
Connecting to 192.168.1.1...
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be
established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of
known hosts.
Administrator@192.168.1.1's password:
sftp> put firmware.bin ras
Uploading firmware.bin to /ras
Read from remote host 192.168.1.1: Connection reset by peer
Connection closed
$